RMC Oil Plus 2C
The combination of the oil (A) and the accelerator (B) ensures a quick dry, quick cure and superior protection.
- Available in 40 standard colours.
- Enhances the natural look and feel of the wood.
- 0% VOC, does not contain any water or solvents.
- Easy to maintain.
- No overlaps or starting marks.
- Minimal use: 30 – 50 m²/L.
- Can be applied to all wood types.
- Very wear-resistant.
- Water- and heat-resistant, ideal for kitchens and bathrooms.
- Very fast curing: 80% in 2 days.
- A short ‘dry’ maintenance period: after 5 days, the surface can be cleaned with water and soap.
- Packaging: duo can 350 ml, 1,3 L and 3,5 L.
RMC FR Oil System
The system combines a pre-treatment with the fire-retardant RMC FR Base and a finish with RMC FR Oil 2C.
- No build-up of layers, no saturation.
- No solvents or water, 0% VOC.
- Available in all standard interior RMC-colours.
- Manual and industrial application.
- Optimal performance: low consumption.
- Certificate Bfl-s1 tested according to the standard EN 13501-1: EN ISO 11925-2 and EN ISO 9239-1.
- Packaging RMC FR Base: can 1 L and 5 L.
- Packaging RMC FR Oil 2C: duo can 1,3 L and 3,5 L.
RMC Invisible Oil System
- Environmentally friendly: 0% VOC.
- Does not contain any water or solvents.
- No overlaps or starting marks.
- Easy maintenance.
- Can only be applied to sanded surface areas.
- Packaging RMC Invisible Oil: bottle 100 ml and can1 L.
- Packaging RMC Invisible Maintenance Oil: bottle 100 ml and can 0,5 L.
Colour Oil 2,5 l – Brazil Brown
ITEM NO. 530225AA
For the colouring and protection of wood floors either finished by hand or with machine.
- For new or old wood floors
- Colours and protects in one application
- Certified by IBR
Colours
Castle Grey
Walnut
Brandy
Lightbrown
Brazil Brown
Redbrown
Extra White
Black
Antique
Extra Grey
1
Product details
Oil finishing and colouring in one application. Suitable for all wood species, as well as cork. Colour Oil may be used on both unfinished or freshly sanded interior woodwork.
How to…
The floor or woodwork should be freshly sanded and completely clean, dry, and free from stains before the application of the Colour Oil. Clean the floor with 125 ml Wood Cleaner mixed into 5 litre water. The Colour Oil requires a uniform surface. Transverse sanding traces must be removed with a sanding disc grit 100-120.
Product, room and floor temperature should be between 15°C-35°C (59˚F-95˚F). Ensure good ventilation at all times during the application and drying time.
1
Shake the container with Colour Oil well before and during application.
2
Apply the oil in an even coat onto an area of approx. 15 m2 with a short-haired paint roller. Let the floor absorb the oil for approx. 20 min. Subsequently, the oil is worked into the wood with a yellow or red polishing pad either manually or for large areas with a floor machine. Polish for approx. 15 min. till the floor appears saturated with oil.
3
Beware! Should any excess oil appear on the surface, remove this with cloths or paper or scrape onto next section of floor to be oiled. Buff floor with white polishing pads and with lint-free cotton cloths under the floor machine.
4
The colour oiled floor is pre-hardened after approx. 6 hours at room temperature of 20°C (68˚F) and completely hardened after 5 days.
5
If a silk-mat surface is required, the finished floor may be buffed with 1 dl of Colour Oil to 10 m2 of floor. This is done after the pre-hardening time and the oil must be polished carefully into the floor.
6
Cover walking areas with corrugated cardboard for 5 days.
7
Clean with Natural Soap. Maintain with Maintenance Paste or Colour Oil, but first clean with Wood Cleaner.
Technical data
| Product properties | |
| Declaration: | Vegetable oil components, isoparaffin, pigments. Contains Cobalt bis (2-ethylhexanoate). |
| Form: | Liquid |
| Density: | 0,9-1,1 |
| Coverage: | 10-12 m2/litre |
| Colours: | 11 colours |
| Odour: | Faint |
| Application tools: | A polishing machine with beige polishing pad. Paintroller and cotton cloths. |
| Cleaning of tools: | With Solvent. |
| Disposal: | Empty containers and residues to be disposed of according to local regulations. |
| Available pot sizes: | 1 litre and 2,5 litre |
Diamond Oil 2,5 l – Natural
ITEM NO. 522225AA
Diamond Oil is used for oil finishing of wooden floors with floor machine. The oil ensures an extremely hard-wearing, dirt and water repellent surface. Diamond Oil is ideal for basic finishing of any unfinished, new and newly sanded interior woodwork.
- Suitable for all types of wood floors
- Waterproof
- Extremely high solid content
- Extremely hard-wearing surface
- Fast drying
Colours
Extra White
Carbon Black
Sand Grey
Caramel Brown
Chokolate
White
Extra White
Concrete Grey
Smoke Brown
1
Product details
Diamond Oil is used for oil finishing of wooden floors with floor machine. The oil ensures an extremely hard-wearing, dirt and water repellent surface. Diamond Oil is ideal for basic finishing of any unfinished, new and newly sanded interior woodwork. Content of solvent is less than 1%. Floor machine is recommended for the polishing of bigger areas.
How to…
The unfinished woodwork should be freshly sanded with grit 100-120. The floor must be completely dry and free from dirt and grease before the oil application.
Recommended wood-moisture max. 12%. Product, room and floor temperature should be between 15°C–35°C (59˚F-95˚F). Ensure good ventilation at all times during the application and drying time.
1
The floor can be cleaned with WOCA Wood Cleaner mixed with water 1:40 if necessary. Leave floor to dry fully before oil application.
2
Shake oil container well before and during use. Containers with different batch numbers should be mixed before use to avoid colour differences. Apply the oil with a short-haired paint roller in an even coat onto approx. 5-10 m2 of floor.
3
Leave the oil to be absorbed for 5-10 minutes. If dry spots appear, apply more oil.
4
The area is now polished with beige polishing pad under doodlebug or with floor machine until surface appears saturated.
5
Polish the floor after using cotton cloth under floor pad to remove any possible excess oil. Continue stepwise till the whole floor has been polished. The floor should not appear wet and there should not be any excess oil left on the surface after polishing.
6
After 6-8 hours, the floor should be dry-buffed with Extra White polishing pad. If a silk-mat surface is required, the finished floor may be buffed with 100 ml. of Diamond Oil to 10 m2 of floor. This is done between 6-12 hours after first application. The oil must be polished carefully into the floor. Remove any excess oil from the surface.
7
After 24 hours the floor can be used with caution.
8
Tools may be cleaned with WOCA Solvent.
9
Do not expose the floor to water during hardening time – approx. 3 days depending on air-temperature and moisture (ideally >18˚C/64˚F and low to moderate humidity).
10
After the hardening time, the floor should be cleaned with Natural Soap or Oil Refresher, which leaves a protecting layer on the surface.
Regular cleaning: Natural Soap or Oil Refresher. Re-oil with Maintenance Oil or Maintenance Paste when required.
Technical data
| Product properties | |
| Declaration: | Vegetable oil components, pigments (Extra White). Solid matter content >99%. |
| Form: | Liquid |
| Flash point: | >100 |
| Density: | 0,9-1,1 |
| Coverage: | 20-25 m2/litre |
| Colours: | 9 colours |
| Odour: | Faint |
| Application tools: | Either polishing machine or doodlebug for the manual finishing. Paintroller and cotton cloths. |
| Cleaning of tools: | With Solvent. |
| Disposal: | Dispose of this material and its container to local disposal facility for chemical waste. |
| Available pot sizes: | 1 and 2,5 litre |
Hardwax Oil 0,75 l – Natural
ITEM NO. 529510A
WOCA Hardwax Oil is used for oil finishing of wooden floors manually or with polishing machine.
- Suitable for all types of wood floors
- Suitable for large areas
- Filmbuilding
- Certified by IBR
Product details
WOCA Hardwax Oil is used for oil finishing of wooden floors manually or with polishing machine. The oil ensures an extremely hard-wearing and light film-building surface. WOCA Hardwax Oil is ideal for basic finishing of any unfinished, new and newly sanded interior woodwork, or for topcoat on WOCA Colour Oils. Polishing machine is recommended for the polishing of bigger areas.
How to…
The unfinished woodwork should be freshly sanded with grit 100-120. The floor must be completely dry and free from dirt and grease before the oil application.
Recommended wood-moisture max. 12%. Product, room and floor temperature should be between 15°C-30°C (59˚F-86˚F). Ensure good ventilation at all times during the application and drying time.
1
The floor can be cleaned with WOCA Wood Cleaner mixed with water 1:40 if necessary. Leave floor to dry fully before oil application.
2
Stir and mix oil container well before and during use. Containers with different batch numbers should be mixed before use to avoid colour differences.
3
Apply the oil in a thin layer with a short-haired roller or similar in an even coat. Leave the oil to be absorbed for 20 minutes.
4
The area is now polished with white or beige polishing pad under doodle-bug or with polishing machine until the excess oil is polished in, and the area appears saturated.
5
Leave the floor to dry for 8-10 hours.
6
If necessary a second coat can be applied. Follow step 3-5.
7
Tools may be cleaned with WOCA Solvent.
8
The floor can be used with care the next day and is fully hardened after 3 days at normal indoor conditions. Do not clean the floor until fully hardened.
9
After the hardening time, the floor should be cleaned with Natural Soap or Oil Refresher, which leaves a protecting layer on the surface.
Regular cleaning: Natural Soap or Oil Refresher. Re-oil with WOCA Hardwax Oil or Maintenance Paste when required.
Technical data
| Product properties | |
| Form: | Liquid |
| Flash point: | 66 |
| Density: | 1 |
| Coverage: | 8-12 m2/litre |
| Colours: | Natural and extra white. |
| Odour: | Faint |
| Application tools: | A polishing machine with beige or white polishing pad. Paintroller and cotton cloths. |
| Cleaning of tools: | With Solvent |
| Disposal: | Dispose of this material and its container to local disposal facility for chemical waste. |
| Available pot sizes: | 0,75 litre and 2,5 litre. |
High Solid Master Oil 2,5 l – Natural
ITEM NO. 522026AA
High Solid Master Oil is used for oil finishing of wood floors with floor machine. High Solid Master Oil is ideal for basic finishing of unfinished, new and newly sanded interior woodwork.
- Suitable for all types of wood floors
- Especially suitable for commercial areas
- To be applied solely by machine
- High solid content
- Certified by IBR
Product details
High Solid Master Oil is used for oil finishing of wood floors with floor machine. The oil ensures a hard-wearing, dirt and water repellant surface. High Solid Master Oil is ideal for basic finishing of unfinished, new and newly sanded interior woodwork. It is suitable for any type of wood floor including cork. Use floor machine for the polishing.
How to…
The unfinished woodwork should be freshly sanded with grit 100-120. Clean the floor with 125 ml Wood Cleaner mixed into 5 litre water. The floor must be completely dry and free from dirt and grease before the oil application.
Recommended moisture max. 12%. The oiling is made at min. 18°C (64˚F). Product, room and floor temperature should be between 15°C–35°C. Ensure good ventilation at all times during the application and drying time.
1
Shake oil container well before and during use. Apply the oil with a short-haired paint roller in an even coat onto approx. 10-15 m2 of floor.
2
Leave the oil to be absorbed for 5-10 minutes. If dry spots appear, apply more oil.
3
Excess oil is removed or scraped onto next section of floor to be finished.
4
The area is now polished with beige polishing pad under doodle-bug or with floor machine until the area appears saturated. The floor should not appear wet and there should not be any excess oil left on the surface after polishing. Continue stepwise till the whole floor has been finished.
5
After 6-8 hours the floor should be buffed with white polishing pad. If a silk-mat surface is required, the finshed floor may be buffed with 1 dl High Solid Master Oil to 10 m2 of floor. This is done after the pre-hardening time and the oil must be polished carefully into the floor. Remove any excess oil from the surface.
6
After 24 hours the floor can be used with caution.
7
Tools may be cleaned with Solvent.
8
Do not expose the floor to water during hardening time – approx. 36-48 hours (white oil 72 hours).
9
After the hardening time the floor should be cleaned with Natural Soap , which leaves a protecting layer on the surface. Cleaning and maintenance may be done with Natural Soap respectively Maintenance Paste/Oil as required.
Technical data
| Product properties | |
| Declaration: | Vegetable oil components, isoparaffin, pigments (white). Contains Cobalt bis (2-ethylhexanoate). May produce an allergic reaction. |
| Form: | Liquid |
| Flash point: | >100 |
| Density: | 0,9-1,1 |
| Coverage: | 18-20 m2/litre |
| Colours: | Natural, white and extra white. |
| Odour: | Faint |
| Application tools: | A polishing machine with beige polishing pad. Paint roller and cotton cloths. |
| Cleaning of tools: | With Solvent. |
| Disposal: | Empty containers and residues to be disposed of according to local regulations. |
| Available pot sizes: | 2,5 litre and 5 litre. |
Master Floor Oil 2,5 l – White
ITEM NO. 522573AA
Master Floor Oil may be used on all unfinished, freshly sanded and newly laid wood floors in all wood species. To be used on untreated and lye primed woodwork such as interior floors, stairs, panels and furniture.
- Suitable for all types of wood
- Suitable for large areas
- Also suitable for manual application
Product details
Master Floor Oil may be used on all unfinished, freshly sanded and newly laid wood floors in all wood species. To be used on untreated and lye primed woodwork such as interior floors, stairs, panels and furniture. The Master Floor Oil has excellent penetration properties and therefore ensures a hardwearing, dirt and water resistant surface. The Master Floor Oil Natural is mainly used on dark wood species and enhances the natural warm glow of the wood whereas light wood species are often finished with Master Floor Oil White which maintains and protects the natural light colour. Product, room and floor temperature should be between 15°C–30°C (59˚F-86˚F). Ensure good ventilation at all times during the application and drying time.
How to…
1
The unfinished woodwork must be sanded finely (grit 100-120). Clean the floor with 125 ml Wood Cleaner mixed into 5 litre water. The floor must be completely dry and free from dirt and grease before the oil application. Recommended moisture max. 12%. The oiling is made at min. 15°C (59˚F).
2
Shake oil container well before and during use. Containers with different batch numbers should be mixed before use to avoid colour differences. Apply the oil with a short-haired paint roller in an even coat onto approx. 5-10 m2 of floor.
3
Leave the oil to be absorbed for 5-10 minutes. if dry spot’s appear, apply more oil.
4
The area is now polished with a beige polishing pad under doodle-bug or with polishing machine until the area appears saturated.
5
Polish the floor using cotton cloth under floor pad to remove any possible excess oil. Continue stepwise till the whole floor has been polished. The floor should not appear wet and there should not be any excess oil left on the surface after polishing.
6
After 6-8 hours the floor should be buffed with 1 dl Master Floor Oil to 15 m2 of floor. This is done after the prehardening time and the oil must be polished carefully into the floor. Remove any excess oil from the surface.
7
After 12 hours the floor can be used with caution.
8
Tools may be cleaned with WOCA Solvent.
9
Do not expose the floor to water during hardening time – approx. 3-5 days, depending on air-temperature and moisture (ideally >18˚C/64˚F and low to moderate humidity).
10
After the hardening time the floor should be cleaned with Natural Soap or Oil Refresher, which leaves a protecting layer on the surface.
Regular cleaning: Natural Soap or Oil Refresher. Re-oil with Maintenance Oil, Oil Care or Maintenance Paste when required.
Technical data
| Product properties | |
| Declaration: | Vegetable oil components, isoparaffin, pigments (white). Contains Cobalt bis (2-ethylhexanoate). May produce an allergic reaction. |
| Form: | Liquid |
| Flash point: | 100 |
| Density: | 0,88-0,98 |
| Coverage: | 10-12 m2/l. |
| Colours: | Natural and white |
| Odour: | Faint |
| Application tools: | A polishing machine with beige polishing pad. Paintroller and cotton cloths. |
| Cleaning of tools: | With Solvent. |
| Disposal: | Empty containers and residues to be disposed of according to local regulations. |
| Available pot sizes: | 1 litre, 2,5 litre and 5 litre |
Neutral Oil 2,5 l – Natural
ITEM NO. 541025A
WOCA Neutral Oil is used for a neutral/invisible finish that resembles untreated oak wood on new or newly sanded surfaces.
- Suitable only for oak
- Always in conjunction with Neutral Oil Care
- Certified by IBR
Product details
WOCA Neutral Oil is used for a neutral/invisible finish that resembles untreated oak wood on new or newly sanded surfaces. The oil ensures protection of the surface while still giving the neutral look of raw oak wood.
How to…
The unfinished woodwork should be freshly sanded with grit 100-120. The floor must be completely dry and free from dirt and grease before the oil application.
Recommended wood-moisture max. 12% and Humidity 40-60%. Product, room and floor temperature should be between 15°C-30°C (59˚F-86˚F). Ensure good ventilation at all times during the application and drying time.
1
The floor must be cleaned with WOCA Wood Cleaner mixed with water 1:40. Leave floor to dry fully before oil application.
2
Shake oil container well before and during use. Containers with different batch numbers should be mixed before use to avoid colour differences.
3
Apply the oil in a thin layer with the WOCA Applicator or a paint roller in an even coat. Leave the oil to be absorbed for max 5 minutes. Work in smaller areas one step at a time until the floor is finished.
4
The area is now polished with beige polishing pad with floor machine until the oil has been polished down in the wood. (Change beige/red pad regularly to avoid build up of oil in the pad). Be careful to distribute it evenly. If excess oil remains, remove with cotton cloth.
5
Leave the floor to dry for 3-4 hours.
6
De-nib the surface with Bordeaux pad/lacquer sanding pad when dry. Vacuum clean the surface.
7
Finish the floor with a thin coat of Neutral Oil Care (see work instructions on Neutral Oil Care back label).
8
Tools are cleaned with water and soap.
9
The floor can be carefully used the next day and is fully hardened after one week at normal indoor conditions. Do not clean the floor or expose to water until fully hardened.
10
After the hardening time, the floor should be cleaned with Natural Soap ratio 1:10, which leaves a protecting layer on the surface.
Regular cleaning: Natural Soap. Re-oil with Neutral Oil Care.
Related products
-
Neutral Oil Care
View more -
Wood Cleaner
View more
Technical data
| Product properties | |
| Form: | Liquid |
| Density: | 1-1,05 |
| Coverage: | 8-12 m2/litre |
| Colours: | Colourless |
| Odour: | Faint |
| Application tools: | A polishing machine with beige polishing pad. WOCA Applicator, paintroller and cotton cloths. |
| Cleaning of tools: | With water and soap |
| Disposal: | Empty containers and residues to be disposed of according to local regulations. |
| Available pot sizes: | 2,5 litre |
HS 2K ImpactOil – different colors
Article No.: 10610
By adding hardener, the surface which has been applied by using a roller or trowel dries faster. Advantage: Fast and high load capacity of the impregnated surface possible, water-repellent, excellent chemical resistance. Suitable for children’s toys according to DIN EN 71-3. Transparent version ready for full use already after 24 hours.
Emissions-tested building product in accordance with DIBt guidelines.
SampleSet containing 10 x 0,1 L sample can ImpactOil Color + 2 x 0,1L ActiveColor grey and brown
Colours/Colour variants:
| Transparent | NEW ! |
| Bilinga | Antique Oak |
| Jatoba | Chalk |
| Kambala | Clay |
| Mahagoni | Iron |
| Papyrus | Oyster |
| Smoked Oak | Pearl |
| Black | Sand |
| Sucupira | Silver |
| White | |
| Wenge |
Certified with:
| Article No. | Variant | Container size |
|---|---|---|
| 10610-13 | HS 2K ImpactOil – Transparent | 0,75 kg |
| 10610-18 | HS 2K ImpactOil – Transparent | 2,5 kg |
| 10610-800148 | HS 2K ImpactOil Color – Bilinga | 0,75kg |
| 10610-800147 | HS 2K ImpactOil Color – Jatoba | 0,75kg |
| 10610-800145 | HS 2K ImpactOil Color – Kambala | 0,75kg |
| 10610-800099 | HS 2K ImpactOil Color – Mahagoni | 0,75kg |
| 10610-700133 | HS 2K ImpactOil Color – Papyrus | 0,75kg |
| 10610-800132 | HS 2K ImpactOil Color – Smoked Oak | 0,75kg |
| 10610-900005 | HS 2K ImpactOil Color – Black | 0,75kg |
| 10610-800149 | HS 2K ImpactOil Color – Sucupira | 0,75kg |
| 10610-900126 | HS 2K ImpactOil Color – White | 0,75kg |
| 10610-800150 | HS 2K ImpactOil Color – Wenge | 0,75kg |
| 10610-800200 | HS 2K ImpactOil Color – Antique Oak | 0,75kg |
| 10610-900127 | HS 2K ImpactOil Color – Chalk | 0,75kg |
| 10610-900144 | HS 2K ImpactOil Color – Clay | 0,75kg |
| 10610-900148 | HS 2K ImpactOil Color – Iron | 0,75kg |
| 10610-900143 | HS 2K ImpactOil Color – Oyster | 0,75kg |
| 10610-900146 | HS 2K ImpactOil Color – Pearl | 0,75kg |
| 10610-900145 | HS 2K ImpactOil Color – Sand | 0,75kg |
| 10610-900147 | HS 2K ImpactOil Color – Silver | 0,75kg |
| 10610x-03 | HS 2K ImpactOil Color – Sample can without hardener | 100 ml |
| 10610-9 | HS ImpactOil Color incl. ActiveColor – SampleSet | 12 x 0,1L |
HS Akzent 100 Oil
Article No.: 10601
The raw materials used for this product have been carefully selected for their environmental compatibility. The oil brings out the natural beauty and grain of the wood. The finished surface is also highly resistant to wear and soiling. Additional advantages are a solid content of 100% as well as good chemical resistance. In moderate-traffic areas the product can be applied with a roller (LOBATOOL Microfaserrolle 60-80) as a one-day floor finish system.
Suitable for children’s toys according to DIN EN 71-3.
Emissions-tested building product in accordance with DIBt guidelines.
Certified with:
| Article No. | Variant | Container size |
|---|---|---|
| 10601-13 | HS Akzent 100 Oil | 0,75 l |
| 10601-19 | HS Akzent 100 Oil | 3 l |